| NEW FOR 2004. By popular demand.... these
cables provide computer control of your radio, and CW
sending, from a
single COM serial port. The unit features dual 8' shielded cables,
and
connectors for your PC's serial port, your rig's control jack, and your
rig's KEY jack. The circuitry fits inside the serial port connector,
and
it draws its power from the serial port itself - no batteries or wall
warts
needed! Click
here to read reviews of this product on eHam.net (or write one
yourself).
The cable is known to work with WriteLog, but will work
with any similar application as long as the software 1) asserts the RTS
pin on the serial port (this is where the cable gets its power; check
your user's manual), and 2) supports a COM port CW interface which uses
the ‘standard’ scheme of keying the DTR pin. Choose the proper model for your radio below. If
your rig is a Yaesu be sure to choose the proper one. |
|
| ICOM CI-V dual control/CW cable
For all ICOM radios with CI-V/REMOTE jack. Features DB9 connector, 1/8" stereo phone plug (rig control) and 1/4" stereo phone plug (CW keying). Radios supported include IC-271, IC-471, IC-703, IC-706/II/G, IC-718, IC-7000, IC-7800, IC-725, IC-726, IC-728, IC-735, IC-736, IC-746/PRO, IC-751A, IC-756/PRO/II/III, IC-761, IC-764, IC-765, IC-775, IC-7800, IC-781, IC-821, IC-970, IC-910. (I may have left some out here.... basically all ICOM amateur base radios) |
$52 + $4 S/H (in US) |
| Yaesu CAT dual control/CW cable (with level converter - for
most Yaesu rigs)
For all Yaesu radios with DIN-type CAT jack. Features DB9 connector, DIN plug for your radio(rig control), and 1/4" stereo phone plug (CW keying). Please specify your Yaesu rig when ordering, as
there are several different DIN plugs (if ordering by PayPal, fill in
the box to the right). Radios supported include FT-100, FT-100D,
FT-736/R, FT-747, FT-757GXII (not the GX), FT-767/GX, FT-80C,
FT-817,
FT-840, FT-890, FT-857, FT-897, FT-900, FT-980, FT-990, FT-1000,
FT-1000D, FRG-100. (If you don't see your rig here, email me) See below if you have an FT-847, FT-920, or FT-1000MP/MkV. |
$52 + $4 S/H (in US) |
| RS-232 dual control/CW cable (without level converter -
for the Yaesu FT-847,
FT-920, FT-1000MP, 1000MPMkV,
MkV Field, and FT-2000, and Elecraft K2 and K3.)
For all radios with an RS-232 computer control
jack.
Features DB9 connector on PC end, DB9 plug for your radio(rig control),
and 1/4" stereo phone plug (CW keying). Newer radios with an RS-232 connector already provide
level output
for your PC. This cable is priced lower since the rig-control level
converter circuitry isn't needed. Please specify your rig when ordering. |
$42 + $4 S/H (in US) |